Hi, Hard223 I finally have enough money to buy a second 6850. But I'm thinking what if I purchase a 6870 instead. Then I would get 6850+6780 crossfire under Windows and 6870 performance under OS X. I would like to know if I would get into trouble with two different ATI 6XXX graphic cards under OS X.
ASUS EAH6870 is the newest and most powerful graphics card based on AMD technology, featuring a huge power boost in DirectX11, AMD Eyefinity and 3D gaming. It comes with tons of overclocking potential, which ASUS exclusive Voltage Tweak takes advantage of for up to 50% faster performance compared to reference.
It seems that the hex-edit in ATI6000Controller.kext can only work for the same card, isn't it? The Hex code still can't work very perfect. Sometime the screen(mouse) LAG. I'm still testing the best Hex code for the card. Hi shiecldk, I was thinking the screenshot it was from your system,I understand you know You must test your hdmi output with a monitor with hdmi audio support (for your 889 you must have a AppleHDA mod and the dsdt injection, you can check ). About the dual graphics cards, when you have the second card, we can try to create a new DSDT injection. Regards, Hard @Hard233 I've tried to install my current 6850 on the other PCI-e x16 slot (PEX4) on my motherboard today.
(only 1 graphic card on board) Then here comes some serious problem: 1. DVD player, the application, can't work 2. My screen sometimes has a little LAG. In 'system info', the card is recognized as 'ATI Radeon HD 6XXX 1024 MB', even I added DSDT on PEX4 4. Sometimes it gets kernel-panic with 'RealtekRTL81xx.kext' when booting.
Even though I injected both yours and mine DSDT code, or use GraphicesEnabler=Yes, all four issues above still exist. Do you have any idea??? I'm using the patched ATI6000controller.kext. The only good news is that QE/CI can work. I'm worry whether the graphic card on the first slot can work perfectly when I have 2 cards.
@Hard233 I've tried to install my current 6850 on the other PCI-e x16 slot (PEX4) on my motherboard today. (only 1 graphic card on board) Then here comes some serious problem: 1. DVD player, the application, can't work 2. My screen sometimes has a little LAG. In 'system info', the card is recognized as 'ATI Radeon HD 6XXX 1024 MB', even I added DSDT on PEX4 4. Sometimes it gets kernel-panic with 'RealtekRTL81xx.kext' when booting. Even though I injected both yours and mine DSDT code, or use GraphicesEnabler=Yes, all four issues above still exist.
Do you have any idea??? I'm using the patched ATI6000controller.kext. The only good news is that QE/CI can work. I'm worry whether the graphic card on the first slot can work perfectly when I have 2 cards. XD Hi shiecldk, TH3L4UGH1NGM4N, Yes, your problem is the FrameBuffer injection.
If you are using the second PCI-E and DSDT injection. You must use IOREG in order to find the PCI-E 2 address and add the DSDT injection for this second slot. About use two different ATI models, we can use two different 'FrameBuffer' for each ATI card, patching the KEXT for this two FrameBuffers and use DSDT injection also using different FrameBuffers, one for the first one (maybe the same Ducked), and another for the second one. If you send me your ioreg and your DSDT.aml file and ATI Controller KEXT, I can try to modify your DSDT and create a new KEXT file. Regards, Hard. Hey guys, i know this is a pretty old thread, but i was wondering if one of you guys could point me in the right direction. I have my setup working for quite a while now and i never had any problems.
I'm using duckweed as aticonfig. Dvd player and everything is working fine (singlescreen). Today i got a second screen, which also uses dvi, and guess what, it doesn't work so i've read about patching the framebuffer to use the right connecctor (right?) but i don't know how it's actually done.
I know my way around the os and terminal, i just need said point in the right direction i'm using an asus eah 6850, and running 10.7.3. Edit: i just got it working. I used op's ATI6000Controller.kext and GraphicsEnabler=Yes, AtiConfig=Duckweed, AtiPorts=4. Everything works fine now (dvd player, steam) on both displays. Thank you so much! Hey guys, i know this is a pretty old thread, but i was wondering if one of you guys could point me in the right direction. I have my setup working for quite a while now and i never had any problems.
I'm using duckweed as aticonfig. Dvd player and everything is working fine (singlescreen). Today i got a second screen, which also uses dvi, and guess what, it doesn't work so i've read about patching the framebuffer to use the right connecctor (right?) but i don't know how it's actually done. I know my way around the os and terminal, i just need said point in the right direction i'm using an asus eah 6850, and running 10.7.3. Edit: i just got it working. I used op's ATI6000Controller.kext and GraphicsEnabler=Yes, AtiConfig=Duckweed, AtiPorts=4.
Everything works fine now (dvd player, steam) on both displays. Thank you so much! You're welcome. If you like, could you give this new framebuffer a try? Because I don't have second monitor to test with.
I think this might works better than the one in first post. 00 04 00 00 04 03 00 00 00 01 00 00 12 04 04 01 00 08 00 00 04 02 00 00 00 01 00 00 22 05 05 04 04 00 00 00 14 02 00 00 00 01 00 00 00 00 03 05 00 02 00 00 04 02 00 00 00 01 00 00 11 02 06 06.
My knowledge of DSDT is VERY limited to what I have done in the past with Nvidia cards. After failing at getting the 2nd DVI port working, I thought I would try your solution.
(the 6000 controller kext) It worked without any DSDT edits on my UEFI m/board. I thought I would still give the DSDT thing a shot anyway.
I compiled and patched it without errors (just warnings). And used the edits in your latest update.
Only thing is, my card is now seen as ATY,Duckweed instead of AMD Radeon HD 6850 which I was getting using Rampagedev's guide. (I have the same ASUS EAH6850 card). Is it an error on my side? Am I missing something? As you can see from the screenshot, OS X is ignoring the Model name completely.
My knowledge of DSDT is VERY limited to what I have done in the past with Nvidia cards. After failing at getting the 2nd DVI port working, I thought I would try your solution. (the 6000 controller kext) It worked without any DSDT edits on my UEFI m/board.
I thought I would still give the DSDT thing a shot anyway. I compiled and patched it without errors (just warnings).
And used the edits in your latest update. Only thing is, my card is now seen as ATY,Duckweed instead of AMD Radeon HD 6850 which I was getting using Rampagedev's guide. (I have the same ASUS EAH6850 card). Is it an error on my side?
Am I missing something? As you can see from the screenshot, OS X is ignoring the Model name completely. I made one little mistake in the DSDT code. I've updated the code in the first post now.
Try to replace your DSDT code. Hello Everybody, First Hack here, and I have a fresh vanilla install with Mojave 10.14.2 closely following this vanilla installation: I was surprised how well it worked initially with the above suggested settings. Only a few minor things (USB SSDT, signing the Bluetooth Kext, and switching from VritualSMC to FakeSMC) needed to be adjusted to get were I am currently. I built this machine to be a video editing/photography workstation. And so far pretty happy but would really appreciate if anyone has any knowledge or solutions with the few problems I'm still experiencing: 1) FIXED (SEE COMMENT BELOW) Sleep issues waking up from sleep (maybe due to the ASMEDIA USB controller) -FIX WAS UNRELATED TO ASMEDIA CONTROLLER BUT DUE TO PREFERENCE OF 'ALLOW BLUETOOTH DEVICE TO WAKE THIS COMPUTER'/ AN EXTERNAL USB 3 to SATA Cable for Hot plugging SSD's/2.5' HDD's. With USB to SATA adapter unplugged/ Bluetooth preference changed, Mac now sleeps uninterrupted.
2) The ASMEDIA USB 3.1 Gen 2 ports ejecting after sleep 3) Am I currently using the correct setup for graphic acceleration with a connector-less ID for the UHD 630 and Radeon RX580? Specifically for optimized performance with FCPX.
4) Normal Power Consumption? I've attached my config.plist, ioreg.zip from RUNME app, SSDT-UIAC.aml (created using Rehabman Method), and my DSDT.aml (from this post for the Maximus x code courtesy of @MaLd0n ) If anyone has the time to take a look and maybe shed some light if I've done something wrong that be awesome. And for anyone looking to build a similar machine, I would highly recommend it, and feel free to use these settings. If these minor last things are addressed, this is a really solid hack. Cheers, Shark Detailed below is What is Not Working, The Build/BIOS Setup/Install Process, and What is Working.
NOT WORKING: 1) Sleep: If I put the computer to sleep, or it falls asleep on it's own, it wakes up immediately after sleep. I’m getting these errors in terminal trying to figure this out using the following two commands: Command: pmset -g sleep 10 (sleep prevented by powerd, sharingd) Command: log show -style syslog fgrep 'Wake reason' localhost kernel0: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC Here are my current settings: Clover: Boot - Darkwake=0 (tried 1 and 2 as well) Energy Saver Settings: Nothing Checked EXCEPT Put Hard disk to sleep when possible Would like Power Nap Enabled for the purpose of Time Machine, but doesn’t seem to be an option with Hackintosh? Using Terminal I have disabled the following: sudo pmset -a ttyskeepawake 0 sudo pmset -a proximitywake 0 sudo pmset -a standby 0 sudo pmset -a autopoweroff 0 2) USB 3.1 Gen 2 For the 2.0/3.0 Intel Chipset, I’ve tried both the @headkaze Intel FB-Patcher v 1.6.8 and @RehabMan instructions on creating a SSDT. The FB-Patcher did not work completely. So I continued with @RehabMan method, created a SSDT, and sacrificed 2 x usb 2.0 ports and 1 internal RGB LED header to reach my 15 port max with 3.0 speeds on all SS ports. The ASMEDIA Ports work OOB with full 3.1 speeds. However the Eject issue can only be resolved by using an App like Jettison.
And using that app doesn’t solve the sleep issue, computer still wakes. I’d rather figure out why the disks keep ejecting on sleep and if fixing issue #1 would resolve issue #2 or vice versa? Do I possibly need a power management ssdt?
And how would I create one for the ASMEDIA chip? I've now tried using the attached DSDT.aml in my Patched folder. I can now see it's working as my PCI devices in System Profiler are now populating (before it was stating no PCI devices). However still experiencing sleep and eject issues.
Ioreg Reads for the ASMEDIA 3.1 controller as: The 3.1 controllers for the back USB gen 2 ports are controlled by: RP05@1C,4/IOPP/PXSX@0/PXSX@01000000 PRT1@01100000 (type C) (3.1 speeds) PRT2@01200000 (type A) (3.1 speeds) PRT3@01300000 (type C) (2.0 speeds) PRT4@01400000 (type A) (2.0 speeds) The 1 x 3.1 type C port on the front panel is controlled by: RP07@1C,6/IOPP/PXSX@0/PXSX@01000000 HS0 (2.0 speed) SS0 (3.1 Speed) There is also a SS under this controller, and as far as I can tell it does not have a function. Is there a way to disable, such as when creating an Intel Chipset SSDT? 3) FINAL CUT ISSUES/ GRAPHIC ACCELERATION: Currently it doesn’t appear that the IGPU UHD 630 is doing much in iStats. In Apple System Profile/ Activity Monitor GPU window I only see RX580, no UHD 630. Is this how it should be? Or is that what connector-less ID should look like?
With FCPX there is no crashing, glitchy exports, or rendering issues, however not sure if Graphic acceleration is being used to its fullest potential. The IGPU uses 5-8% Memory/ Processor when playing/scrubbing in timeline. And only 5-10% of the IGPU Memory (no processor) is used during any render or export of footage.
The RX580 is still doing most of the hard work. My Bruce X times are quick 14-18 seconds, but I’m curious as to why the IGPU isn’t doing any of the lifiting. Is this expected? I'm pretty happy with how Lightroom and Final Cut are performing, I just want to make sure I've set the hardware up correctly.
Asus Eah 6870 Drivers For Mac Download
4) Power Consumption I have a general understanding of building computers, but not an expert especially with first time building a Hackintosh, overclocking, timings, voltages, etc In HWMonitor the CPU Package Core reads blank, CPU Package Total is anywhere from 3.52w to 4.8w, the CPU Package DRAM is anywhere from 1.12 – 5.08. Is this normal, or high?
My temperatures seem fine and idle between 45-57 C, And Max shortly at 85 during stress tests. So just not sure if the CPU Power Consumption HWmonitor reporting is normal or abnormal. I've attached two HWmonitor screenshots 1 normal idle cpu, one while FCP rendering. THE INSTALL Kexts Used: AirportBrcmFixup.kext AppleALC.kext BRCMFirmwareData.kext BrcmNonPatchRAM2.kext BrcmPatchRAM2.kext FakeSMCACPISensors.kext FakeSMCCPUSensors.kext FakeSMCGPUSensors.kext FakeSMCLPCSensors.kext FakeSMCSMMSensors.kext FakeSMC.kext IntelMausiEthernet.kext Lilu.kext USBInjectAll.kext WhateverGreen.kext XHCI-unsupported.kext BUILD: ASUS ROG Maximus X CODE i7 8700k OC’d to 4800 2 x 16gb Corsair Vegeance LPX DDR4 2400mhz C16 OC’d to 2666mhz Sapphire RX 580 NITRO+ 8Gb Graphics Card BCM94352Z Dell DW1560 (Wifi and Bluetooth Both Natively Working with Rehabman Kexts) BeQuiet! Hey Everybody, I was hoping that the recently released BIOS update for the ASUS Maximus X Code (version 1801) would resolve my two remaining issues of sleep/ USB 3.1 drives ejecting from the ASMEDIA controller. I have a seperate thread here describing the problem in detail: As of yet it the update hasn't resolved the issue.
But could someone clarify if a new DSDT.aml file is needed once upgrading a motherboard's BIOS? I am currently using the one from this thread: I've already created a working SSDT file for my 15 USB ports, this is more in relation to the ASMEDIA 3.1 ports and sleep not working. Cheers, Shark. Hi guys, Though native graphics acceleration is supported on i3 from Mojave, I'm not able to manage to get it. This is my system configuration: Motherboard: Asus Prime H370-Plus CPU: i3-8100 (UHD 630) OS: Mojave 10.14.2 I'm trying every possible way to get full graphics acceleration.
Asus Eah 6870 Drivers For Macbook Pro
But whatever I try it shows only 4MB video memory or leads to Kernal Panic. Here are some ways I have tried so far: Prerequisites: Installed latest Lilu+WEG on L/E. Set DMVT prealloc to 64MB on bios. Option 1: IntelGFX- 0x3E928086, ig-platform-id- 0x3E9B0007, Inject Intel = true. Output: Kernal Panic Option 2: Blank IntelGFX, blank ig-platform-id, Inject Intel = false Output: Kernal Panic Option 3: IntelGFX- 0x3E928086, ig-platform-id- 0x5912000, Inject Intel = true. Output: Booted Successfully but no graphics acceleration.
I knew that ig-platform-id- 0x5912000 doesn't work in mojave and its works only for high sierra but I set this because with this ig-platform-id I can boot. Another way I can boot it by setting invalid Fake IntelGFX value like 0x12345678. Option 4: Downloaded Intel FBPatcher & followed this guide. But as I opened the app, its shows like this: It clearly indicates it neither can detect Intel CPU generation nor GPU memory (currently shows 0 MB). I changed to different PlatformId from the drop down but no improvement. Anyway I applied a patch with SMBIOS -Macmini8,1 by someione's recommendation.
I attached a config file (configfbpather.plist) for this. Output: Kernal Panic I have tried the upper mentioned methods with SMBIOS like iMac14,2 / iMac181,2,3 and Macmini8,1. I'm using HDMI port for display output. Now I don't know whats wrong with theses methods but maybe someone can help me to figure out this problem. I have also attached those config.plist files.
Thanks in advance. Configfakeid0x3E928086.plist configfbpatcher.plist configfbpatcherwithdeviceid.plist configplatform-id0x59120000.plist. Now have a Olarila app, just download app and clover folder for your Chipset!.The topic is for Notebooks and Desktops. Youtube MacOS Install Guide 2018 - Mojave - HighSierra - Sierra - ElCapitan -Mojave Full DSDT patch First.Update bios to last available version!.
If you need DSDT edits for SkyLake, KabyLake or CoffeeLake.Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app Look at my Clover folders and understand what we really need, this is the best way to learn 1-Installation -Create a bootable copy of macOS Sierra / High Sierra / Mojave -Install Clover in USB stick -Replace with my Clover folder -Install Sierra/High Sierra and boot into system! 2-Post Installation -Install Clover in HDD/SSD and replace with my folder -Reboot and activate video! First of all I'm french, sorry for bad english. The laptop is an Asus X70IO: - Processor T4200 (C2D 2GHZ), - Memory 4GB DDR2, - Graphic Card GT120M 1GB, - Chipset NVidia MCP79D. HDD 500go classic (Not SSD) What I've managed to done: I've managed to get to the El Capitan installer trough ##### 6.2.0 USB Key made.
The first problem encounter was the built-in keyboard and mouse were not working, even with USB keyboard/mouse. I Got them to work by adding VoodooPS2Controller.kext in 'Other' folder, but still no USB keyboard nor USB mouse. Strange by the way because USB Key is working.
Installation starts, continues, finishes, fine then reboot fine but in Clover, no internal HDD (Sata Enhanced mode in BIOS but even in IDE mode). USB boot via external enclosure OK (but still with no USB keyboard/mouse. Very weird!) Trying several things and 2-3 clean installation later, the solution I've found is the Enoch version of Chameleon (Rev2961). Now I'm stuck on 3 problems: - USB devices other than 2.0 don't work at all (USB Key, HDD OK so I suppose USB1.1 is not functional) - The system boot like charm, but it can't reboot, shutdown properly ( I don't really care about sleep function but it could be cool if so.) - There is no sound (HDMI is not used at all on this computer) Is there anyone coud help me? Thank's a lot in advance.
EDIT: Error in post title, the laptop model is X70I0, not K70I0 Jonathan (Alias Nikko485). Make ASUS EAH6850 100% work!
I would definitely recommend this adapter. Rangemax next wireless adapter wn311b drivers for mac download.